Home  » Miscellaneous  » Fuel and Renewable Energy  »Listing #246796

Perry Model BD1510 Belt Drier on Flat Bed Trailer

Posted Jun 20, 2024
07********Show phone
Contact Name: Sarah Weatherlake
Phone Number: 07860 173293
Email: tamsin@dunsterheat.co.uk
County: Somerset

Throughput Capacity: 0.77 tonnes per hour on Woodchip 280kg/m3.

(dry output 340 kg per hour) subject to sample and test.

Relative Humidity: 70%.
Ambient Temperature: 15 degree Celsius.
Drying Temperature: 75 degree Celsius.
Moisture Reduction: 50% from 60% to 10% M.C wet basis.
Belt width: 1.64M
Main drive KW: 0.75kw 3 phase 415V 50 Hz IP55.
Inlet: Multiple discharger feed hopper comprising 4 off 250mm diameter discharge augers to feed the woodchip into the drier.
2 off 3kw 3 phase 415V 50 Hz IP55. Used item.
Rotary brush drive: 0.55kw 3 phase 415V 50 Hz IP55
Drier outlet: Discharge auger to one side with drive: 3kw 3 phase 415V 50 Hz IP55

Discharge elevator: Approximately 12M by 0.6M
Overall Drying Section Length: 10m.
Overall Cooling section length: 0m.
Overall length inc Drive: ( 1.5m ) & Tail ( 2.5m) = 14m
Type of Heat source: Customers own supply.

Heat exchanger units: customers own
Heat source to provide: approximately 800kw.
Fan quantity: 3
Heated air volume required: 39,000 m3/hr
Position of Fans: side mounted.
Control Panel: Touch screen PLC

Automatic belt tracking system: with belt sensor and electric actuator controlled roller.

Automatic moisture control: using differential temperature measurement at drier inlet and outlet. 

Tamsin Spens

User since: Jun 20, 2024
See all ads »

+4********Show phone
 Share  Report  Favorite  Add to Compare

Similar Ads

East Riding of Yorkshire
Posted 3 days ago to Fuel and Renewable Energy
£22,000
Go to top